Home Gardening Forum - Home Repairs Forum

Custom Home Plan Custom House Plan Professional, Cad Drafting Service and CAD Conver

danoconnell — Fri, 20 Nov 2009 11:12:03 GMT

Architect,house plan architect, custom home plans, house plans cad drafting service, architectural drafting cad conversion home plan drafting, house plan drafting, plan design residential drafting service, architectural drafting service.

homeplanprofessional@gmail.com

Please Visit : homeplanprofessional

Custom house plans

danoconnell — Fri, 20 Nov 2009 11:05:49 GMT

House plan designers, House Plan Architect, custom house plans designed by architects, home plans,residential drafting service, cad drafting service, cad conversions, Architectural Drafting.

dhouseplanarchitect@gmail.com

Please Visit: houseplanarchitect

Modify house plans

danoconnell — Fri, 20 Nov 2009 11:03:10 GMT

Modify house plans, house plan customizations,modify houseplans provides cad drafting services including design development, construction documents, as-built drawings, and mechanical, electrical and plumbing drawings,all exterior elevations,all floor plans.

homeplanprofessional@gmail.com

Please Visit : modifyhouseplans

Paper to Cad Conversion

danoconnell — Fri, 20 Nov 2009 10:59:54 GMT

Manually drawn CAD Conversion using Autocad, Tiff to drawing, PDF to drawing,JPG to drawing, paper to Cad Conversion, House plan drafting and cad services,accurate,fast, affordable.

dcreativedraftingservice@gmail.com

Please Visit:papertocadconversion

Paper to Cad Conversion

danoconnell — Fri, 20 Nov 2009 10:43:17 GMT

Cad Drafting Service house plan drafting and cad conversions.

danoconnell — Fri, 20 Nov 2009 10:42:12 GMT

Cad Drafting Services, autocad drafting, architectural drafting, custom home plans, house plans. Modify houseplans,customize house plans, houseplans modify, customize plan house.

dcreativedraftingservice@gmail.com

Please Visit:creativedraftingservice

Photo- Re: Order of Operations to Refinish Table Top

frank1492 — Sat, 14 Nov 2009 18:48:33 GMT

As you can see, it's pretty nasty:
http://s132.photobucket.com/albums/q...F4160Small.jpg

converting to LPG??

mm — Sat, 14 Nov 2009 18:00:22 GMT

Sure you can convert to propane- aka LPG. Furnace, stove, clothes dryer,
water heater are all available in propane. A gallon of oil contains
about half again the BTU's of a gallon of propane, so usage for heating
can be very roughly estimated. For every 100 gallons of oil you used,
you will use about 150 of propane. A new propane furnace will almost
certainly be a lot more efficeint than the old oil one so that must be
figured into the equation also. I have absolutely no idea what either
fuel costs in your area-- but it is a crap shoot because what either
costs now and what they will cost this time next year are two entirely
different things-- oil could be $1.25/ gal or it could be $6.00 /gal.
BTW, with propane tanks, they fill it to 80% of the rated capacity, and
tanks typically come in 250 and 500 gallon for residential use, so they
will actually hold 200 or 400 gallons. Estimate your usage from previous
oil useage, and then you can figure out about how long wither size tank
will last. Larry

Kitchen cabinet warehouse remodel. (under 5k?)

in2dadark — Sat, 14 Nov 2009 17:58:44 GMT

On Nov 14, 1:01*pm, in2dadark wrote:

or maybe 'this' one :0) http://pic20.picturetrail.com/VOL139.../377888518.jpg

Unbalanced washer knocking and banging and can't spin up

ransley — Sat, 14 Nov 2009 17:58:14 GMT

On Nov 14, 7:26*am, Van Chocstraw
wrote:

Could a loose - broken spring be the cause, maybe lifting the top
cover will allow you to see the problem. But I never repaired a
washer, I just use them.

Unbalanced washer knocking and banging and can't spin up

Tony Hwang — Sat, 14 Nov 2009 17:27:53 GMT

Van Chocstraw wrote:
Hmm,
Bought a garbage? Instead of fuming, how about figuring it out?

Unbalanced washer knocking and banging and can't spin up

John D99 — Sat, 14 Nov 2009 17:27:36 GMT

"Van Chocstraw" wrote in message
news:xKmdnRqO_L6SLWPXnZ2dnUVZ_oBi4p2d@giganews.com ...

Put barbel some plates in it and let it self destroy.

But, only after using a level to make sure it's sitting level and solid. If
that doesn't help, there may be a loose or missing bolt in the works.

Unbalanced washer knocking and banging and can't spin up

willshak — Sat, 14 Nov 2009 17:21:30 GMT

on 11/14/2009 8:26 AM (ET) Van Chocstraw wrote the following:

Don't wash rugs in it.

--

Bill
In Hamptonburgh, NY
In the original Orange County. Est. 1683
To email, remove the double zeroes after @

Electric circuit "detective"

Smitty Two — Sat, 14 Nov 2009 16:57:09 GMT

Smitty Two wrote:
....

Well, we know it ain't a Fluke... :)

--

Unbalanced washer knocking and banging and can't spin up

Smitty Two — Sat, 14 Nov 2009 16:52:05 GMT

In article ,
Van Chocstraw wrote:

Man, you don't know nuttin' about home repair. Take it out in the
backyard, and use your shotgun on the heavy side as many times as
necessary to balance it. No more difficult than balancing a wheel on a
car, really.